Equipment & Parts

The shop floor. Built for precision.

A sampling of the equipment that powers our work. Not exhaustive — if you have a question about whether we can make your part, give the shop a call.

MORRISTOWN, TNISO 9001:201550+ YEARS
Featured Equipment

Machines we lean on every day.

Mitsubishi ML3015GX-F100 fiber sheet laser on the ATM floor
Sheet Laser · Fiber

Mitsubishi GX-F ADVANCED

  • AI-assisted fiber laser cutting
  • 0.04″ to 1″ material thickness
  • Automated zoom head — no lens changes
  • Up to 77% less nitrogen via AGR-eco
  • 45% less energy vs. traditional CO₂
Bodor fiber sheet laser cabinet with its sheet table
Sheet Laser · Fiber

Bodor Fiber Sheet Laser

  • Second sheet laser — runs alongside the Mitsubishi
  • Fiber cutting on mild steel, stainless, and aluminum
  • High-speed production cutting for repeat sheet work
  • Doubles our throughput on fab and assembly jobs
Bodor tube laser chuck with tube stock loaded
Tube Laser · Fiber

Bodor Tube Laser

  • Fiber laser cutting for tube and structural profiles
  • Round, square, and rectangular tube — plus angle and channel
  • Holes, slots, miters, and copes in a single setup
  • Eliminates secondary drilling, sawing, and notching
  • Parts come off ready to weld or assemble
ZPS TAJMAC MCV 1210 5-axis machining center
5-Axis CNC Machining Center · Trunnion

ZPS TAJMAC 1210

  • Work envelope: 24″ × 24″ × 24″ (X Y Z)
  • 900-lb weight limit
  • Full 360° C axis · 190° A axis (±95°)
HAAS VF-3YT machining center
Machining Center · 5-Axis Trunnion Capable

HAAS VF3YT

  • Available as a second 5-axis machine when needed
  • Backs up production capacity
HAAS VF-2 vertical machining center
Vertical Machining Centers

3-Axis CNC VMCs

  • Multiple machines on the floor
  • Range: 16″ × 30″ × 20″ up to 80″ × 30″ × 30″
  • Handles a wide span of part sizes
Inside a CNC turning center: chuck, bed, and tool turret
Lathes

2-Axis CNC Turning Centers

  • Multiple turning centers
  • Up to 18″ diameter × 40″ long
  • Longer parts up to 3″ diameter
AgieCharmilles FI 440 wire EDM
Electrical Discharge Machining

Wire EDM

  • Accuracy to ±0.0001″ (2.5 μm)
  • Cuts pieces over 10″ thick
  • Machine after heat-treat — no distortion
  • Near-square internal corners and tapers
ActSpark sinker EDM with its control
Electrical Discharge Machining

Sinker EDM

  • Ideal for blind cavities and complex pockets
  • No burrs generated · clean intricate work
Sheet Metal Forming

200-Ton Brake Press

  • High-capacity bending for thicker stock
  • Custom tooling made in-house from our tool & die side
Sheet Metal Forming

100-Ton Brake Press

  • Day-to-day forming for shapes and angles
  • Paired tooling design and build in-house
Precision Hole Grinding

Jig Grinder

  • Complex shapes and holes to tight tolerance
  • Most accurate method for precision hole work
Other Equipment

Plus a full bench of supporting tools.

Welding, finishing, inspection, and the secondary equipment that keeps a job moving from raw stock to a finished part.

Coming Soon Finishing

Powder Coating Capability

The booth and oven are on the floor. In-house powder coating is on its way — adding a durable finish option without handing the job off to an outside vendor.

The new powder coating booth and oven on the ATM floor
What We Build

Tools, dies, parts, assemblies.

Most shops can make a part. Few can also design and build the tooling that makes the part. ATM does both — under one roof.

Die sets and tooling stored on the ATM racks
/01

Tool, Die & Mold Sets

Designed and built in-house from start to finish — precision tooling for production, prototype, or replacement.

Custom press brake tooling mounted in the brake
/02

Press Brake Tooling

Custom press brake tooling built to satisfy specific forming requirements that off-the-shelf can't.

A complete die set mounted in a stamping press
/03

Complete Die Sets

Full stamping die sets designed and built by our tool room — ready to run on our presses or yours.

A production run of machined parts, packed in tubes
/04

Precision Machined Components

Prototype through full production runs. 5-axis, 3-axis, turning, EDM — whatever the part needs.

Formed sheet metal brackets
/05

Sheet Metal Assemblies

Cut on the fiber laser, formed on the brake presses, finished with welding and sanding.

Welded tube frames staged on the shop floor
/06

Welded Assemblies

MIG, TIG, and brazed work — single complex assemblies or thousands of pieces.

Ready when you are

Request a quote.

Send us drawings, specs, or a sketch — we'll come back with a clear estimate and lead time.

Request a Quote → Or call (423) 581-1721